one. Product Introduction

This temperature sensor is suitable for precise temperature control and quick reflection of electrical appliances. Radial glass-sealed thermistor chip is adopted to measure the temperature more accurately; epoxy resin encapsulation, high and low temperature impact products resistance value does not drift, do not unshell; ground wire, temperature probe integrated installation, installation is more convenient, performance is more reliable. Has heat resistance, cold resistance and very good stability.

two. Product Features

1. Wide temperature measurement range: -30 ℃ ~ 180 ℃, no cracking, no shelling, stable resistance and small measurement error.

2. It is assembled with 100 ℃ high-precision radial glass-sealed thermistor chip, stainless steel, epoxy resin, thermal grease, etc. The temperature measurement is more sensitive and the temperature control is more accurate. Longer.

3. The sensor probe comes with a 4.8 insert, which is very convenient to install the ground wire.

4. Waterproof rating: IP66

5. Humidity sensitivity level: 1A level

6. Applicable to: smart kettle, smart kettle, coffee machine, milk machine, water dispenser.

7. The size can be customized and the parameters can be customized. Welcome to consult customer service.

three. Product parameters

1. Resistor resistance value: R (100 ° C) = 3.3KΩ ± 1%

2. B value: 4066K ± 1%

3. Operating temperature range: -40 ℃ ~ 180 ℃

4. Thermal time constant: about 3 seconds (in water bath)

5. Withstand voltage: AC = 1500V * 1mA * 60s without breakdown or flicker

6. Insulation resistance: DC = 500V resistance 100MΩ or more