noe. Product Introduction
This temperature sensor is suitable for precise temperature control and quick reflection of electrical appliances. Radial glass-sealed thermistor chip is used to measure the temperature more accurately; epoxy resin encapsulation, high and low temperature impact products, resistance value does not float, do not unshell; hardware shell head uses ultra-thin stainless steel, reflecting more sensitive and heat-resistant , Cold resistance and very good stability.
two. Product Features
1. Wide temperature measurement range: -30 ℃ ~ 180 ℃, no cracking, no shelling, stable resistance and small measurement error.
2. It is assembled with 100 ℃ high-precision radial glass-sealed thermistor chip, stainless steel, epoxy resin, thermal grease, etc. The temperature measurement is more sensitive and the temperature control is more accurate. Longer.
3. Waterproof rating: IP66
4. Humidity sensitivity level: 1A level
5. Applicable to: smart kettle, smart kettle, coffee machine, milk machine, water dispenser.
6. The size can be customized and the parameters can be customized. Welcome to consult customer service.
three. Product parameters
1. Resistor resistance value: R (100 ° C) = 3.3KΩ ± 1%
2. B value: 4066K ± 1%
3. Operating temperature range: -40 ℃ ~ 180 ℃
4. Thermal time constant: about 3 seconds (in water bath)
5. Withstand voltage: AC = 1500V * 1mA * 60s without breakdown or flicker
6. Insulation resistance: DC = 500V resistance 100MΩ or more
